How to repair a CV Boot (specific and universal)

Specific CV Boot

1. Remove the clamps
2. Cut the CV boot which need to be changed.
   Disassemble the CV joint
3. Clean the grease from the CV joint with a piece of paper
4. Assemble the CV boots
5. Assemble the CV joint
6. Lubricate it with grease
7. Fit the boots into the CV joint
8. Put the new clamps on.

Universal CV Boot (with tool)

1. Remove the clamps
2. Cut the boot to be changed
   Clean the grease from the CV joint with a piece of paper
3. Assemble the boot on the tool
4. Stretch it out and pass it through the CV joint
5. Return the boot to its original size and remove the tool
6. Lubricate it with grease
7. Fit one side of the boot into the CV joint and the other one into the drive shaft
8. Finally, fit in the new clamps.

Universal CV boot (with cone)

1. Remove the clamps.
2. Cut the boot to be changed.
3. Clean the grease from the CV joint with a piece of paper.
4. Assemble the cone.
5. Assemble the boot on the cone in the opposite direction.
6. Slide the boot and turn it into its correct position.
7. Lubricate with grease.
8. Fit one side of the boot into the CV joint and the other one into the drive shaft.
9. Fit in the new clamps.